3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

03 Ram Command Start Issue

Thread Tools
 
Search this Thread
 
  #1  
Old 01-03-2010 | 11:57 PM
zimm's Avatar
zimm
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 25
Likes: 1
From: Saskatchewan, Canada
Default 03 Ram Command Start Issue

I have a 2003 Ram 4.7 and a friend of mine was installin a command start in it and all went ok untill he went to go put the ring around the key cylinder and cracked the ring around the stock immobilzer and it cracked right through we tried pushing it together and nothing now when i put my key in the ignition everything powers up but the truck wont even turn over or nothing wondering if this immobilzer is garbage now or what i need to do to make my truck run with the key at least

thanks
 
  #2  
Old 01-04-2010 | 12:13 AM
zimm's Avatar
zimm
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 25
Likes: 1
From: Saskatchewan, Canada
Default

also there is a red light on right by the heat gauge and if i unplu them immobilzer and plug it back in it will go off for a second then go back on
 



Quick Reply: 03 Ram Command Start Issue



All times are GMT -4. The time now is 10:02 PM.