IAT sensor help on Hemi
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 9
Likes: 0
IAT sensor help on Hemi
I bought a use 07 dodge ram a week ago!! I was changing my oil today and discovered a crappy Magnum Performace Module hooked up to the IAT sensor!! How do I hooke it back up to the factory plug!! I have know instructions!!
Hall Of Fame
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Well pics always help. Some people put those on there to trick the IAT into reporting cooler incoming air temps to assist in better mpg/power. So my first question is are you sure you want to remove and and if so, why? My second question is if so, does it clip on to the IAT wires? If so, then just disconnect the wires. If it plus in between the IAT sensor and harness then unplug it and plug the harness back into the IAT.
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 9
Likes: 0
Well pics always help. Some people put those on there to trick the IAT into reporting cooler incoming air temps to assist in better mpg/power. So my first question is are you sure you want to remove and and if so, why? My second question is if so, does it clip on to the IAT wires? If so, then just disconnect the wires. If it plus in between the IAT sensor and harness then unplug it and plug the harness back into the IAT.
I figured it out last night!! I thought they spliced the wires on the IAT sensor to install the module. It was just cliped to the two wires on the iAT sensor by butt conectors!!
Reason for taking it off is anything that cost 20 dollars and claim to add 80 HP is bogus to me!!! I am going to get a Diablo Tuner for the Hemi!!
