This may be in the wrong spot, but I have an 08 Hemi Ram with 3 spots for garage door openers. I misplaced my book but how hard are they to program on my garage doors?


I also need to reprogram my doors on a different code since I have no clue who owned it before or I they still have a keypad. If someone may know I'd appreciate it.

 

Found this on a challanger forum, same as our trucks.

1 - Pressed the 2 outer homelink buttons simultaneously for 20 seconds until the display showed them cleared of any programming.

2 - Then I held the remote button 2-3 inches from the homelink in the vehicle and depressed the button on the remote and the homelink button of choice for 2-3 seconds. The display showed that the homelink button was programmed.

3 - Then following further directions I depressed the learn button on the back of the motor unit. Then I went directly into the vehicle and pressed the homelink button that I just programmed 2-3 times for 2 seconds each time.

 

Thanks a bunch! I got the buttons working and reprogramed the garage doors too.

 

No problem. Glad I was finally able to help someone after all the advice I have gotten.

 

Wish my 04 had homelink.