When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
That's where it is on the 3.7, 4.7, and 5.9. The manual I have for 02-05 shows the hemi one to the left of the throttle body. The pcv should have a hose going to the oil filler tube. I'd send you a link for the manual for an 06 but the site seems to be down right now.
Well, it sounds right. I just went outside to snap a pic. This is what mine looks like on the 04 hemi. This is right behind the Throttle Body assembly on the passenger side.
The PCV valve is not on the filler tube. It's on the passenger side of the motor near the firewall. Yep, NAPA is pretty much clueless about the Hemi. They don't know the displacement or what PCV valve it needs. Not really necessary to change it at 30K, though. They can be cleaned a few times before they need replacement.
So is it in the same spot? Im assuming it is, but, just for future reference for others out there wondering if its the same for the 06-08s as the 02-05s.