3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Efan Which wire is low?

Thread Tools
 
Search this Thread
 
Old Feb 24, 2010 | 12:57 PM
  #31  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

orange......yellow.....orange.....yellow......

hell, they're close to one another anyway. Quit being lazy and just go hook it to the battery and see what you get. ;-)
 
Reply
Old Feb 24, 2010 | 01:29 PM
  #32  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

Ok ok ok.............

If you look closely in this pics you will see the brown and ORANGE being used.

http://public.bay.livefilestore.com/...g/102_1727.jpg

 
Reply
Old Feb 24, 2010 | 01:30 PM
  #33  
SMKNRAM's Avatar
SMKNRAM
Champion
Joined: May 2009
Posts: 3,186
Likes: 2
From: Sylva, NC
Default

HA HA HA!! I think it is the orange..... no no wait yellow...... no no I think it is the one that WONT blow fuses, so the opposite of what you have!
 
Reply
Old Feb 24, 2010 | 03:48 PM
  #34  
cheapbeater's Avatar
cheapbeater
Thread Starter
|
Record Breaker
Joined: Feb 2009
Posts: 1,550
Likes: 2
From: Wisconsin Rapids, WI
Default

CHIT!! now i gotta go change it!
and to think i nom'd frog for MOTM... (never voted tho)
thanks weed. you da MAN!
 
Reply
Old Feb 24, 2010 | 04:06 PM
  #35  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

youre welcome bro. I just happened to have had that pic store online
 
Reply
Old Feb 24, 2010 | 04:11 PM
  #36  
SMKNRAM's Avatar
SMKNRAM
Champion
Joined: May 2009
Posts: 3,186
Likes: 2
From: Sylva, NC
Default

good call! I figured it was on high, it took me 3 fuses to figure out I did not need a high speed fan!!!
 
Reply
Old Mar 1, 2010 | 11:19 PM
  #37  
bigpappaholt's Avatar
bigpappaholt
Veteran
Joined: Feb 2009
Posts: 351
Likes: 0
From: Indiana
Default

did my efan this weekend.... i know some people have issues getting fan off... i rented this tool from auto zone and it worked wonderfully with a big monkey wrench, got it off first try.. its an AC clutch holder.
Name:  IMG_0332.jpg
Views: 19
Size:  98.2 KB

also whats a good temp to set controller at for stock stat?
 
Reply
Old Mar 1, 2010 | 11:46 PM
  #38  
SilentRamAD's Avatar
SilentRamAD
Veteran
Joined: Sep 2009
Posts: 361
Likes: 0
From: OC, California
Default

Originally Posted by bigpappaholt
also whats a good temp to set controller at for stock stat?
+1, Because I haven't installed a 180* yet ~_~. And what would happen if you did set it lower than your stock t-stat, would it cause problems with it not engaging and opening ? Kid here still learning the ropes don't hang me

Also if Teach is keeping an eye on this thread. Apparently their controllers aren't the same as the one you got I'm assuming. And was wondering how yours is holding up with the supplied 30A fuse. Because if I need a larger one I'd rather get it now before I do the install this weekend hopefully.
 
Reply
Old Mar 2, 2010 | 07:56 AM
  #39  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

my temp on my controller is set to about 200. I adjusted my temp all the way to the max and started the truck. Then used a temp laser gun to check the temp on the upper rad hose and when it got to 200 I lowered the adjustable switch on the controller until the fan came on. So mine is set somewhere around 200.
 
Reply
Old Mar 2, 2010 | 08:16 AM
  #40  
SMKNRAM's Avatar
SMKNRAM
Champion
Joined: May 2009
Posts: 3,186
Likes: 2
From: Sylva, NC
Default

I have mine about the same I was shooting for 190 ish, I dont have a temp gun, going by dash guage. But with factory t-stat I would set the temp about 200-210. just me
 
Reply



All times are GMT -4. The time now is 08:15 AM.