3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Mopar vs AllPar HP/TQ ratings

Thread Tools
 
Search this Thread
 
Old Apr 17, 2010 | 12:55 AM
  #1  
gasguy's Avatar
gasguy
Thread Starter
|
Professional
Joined: Dec 2009
Posts: 218
Likes: 0
From: Cowtown, Tx
Default Mopar vs AllPar HP/TQ ratings

ramtrucks.com says my truck is rated @ 383hp/404tq.
AllPar and others say 355hp/395tq

Is my engine the same as the 4gen HD's or is it a mixture of 3rd/4th gen

What do ya think.
 
Reply
Old Apr 17, 2010 | 01:05 AM
  #2  
Got_Hemi44's Avatar
Got_Hemi44
Record Breaker
Joined: Nov 2008
Posts: 1,751
Likes: 0
From: Dayton, Ohio
Default

09 2500s have 388 hp/404 lb·ft
 
Reply
Old Apr 17, 2010 | 01:14 AM
  #3  
gasguy's Avatar
gasguy
Thread Starter
|
Professional
Joined: Dec 2009
Posts: 218
Likes: 0
From: Cowtown, Tx
Default

Originally Posted by Got_Hemi44
09 2500s have 388 hp/404 lb·ft
so 2nd gen hemi, that's availble on 4th gen HD's in a 3rd gen body. did i get it right?

Need to dyno it while she's still stock for real #'s. Thanks for the input.
 
Reply
Old Apr 17, 2010 | 01:27 AM
  #4  
JoeHemi's Avatar
JoeHemi
Record Breaker
Joined: Nov 2008
Posts: 2,273
Likes: 1
From: Pierce County, Wa
Default

haha yea that sounds about right. Here's the graphic from Dodge on the 09 Hemis



 
Reply
Old Apr 17, 2010 | 01:48 AM
  #5  
gasguy's Avatar
gasguy
Thread Starter
|
Professional
Joined: Dec 2009
Posts: 218
Likes: 0
From: Cowtown, Tx
Default

so in 6 mos to a year I should start finding performance mods for my truck based on the new '10 hemi 5.7. not much out there right now and what is available is $pendy. Need to get in touch with folks @superchips for proper application. Their website says the 3865 is what i need, but gotta make sure
 
Reply
Old Apr 17, 2010 | 09:07 AM
  #6  
Got_Hemi44's Avatar
Got_Hemi44
Record Breaker
Joined: Nov 2008
Posts: 1,751
Likes: 0
From: Dayton, Ohio
Default

Originally Posted by gasguy
so 2nd gen hemi, that's availble on 4th gen HD's in a 3rd gen body. did i get it right?

Need to dyno it while she's still stock for real #'s. Thanks for the input.
3rd gen 2500/3500 are 2003-2009 and 4th gen 2500/3500 are 2010-present. The 2nd gen Hemi was released in 09 for the 4th gen 1500s so they put it in.
 
Reply




All times are GMT -4. The time now is 01:39 AM.