guys i need some measurments . im getting ready for a brush guard but the one i found is for a 04-06 ram 2500 . so my question is for you 2500 guys what is the measurment you all have from the inside where the bumper mounts ,the 2 holes are for bar mounts go. i need the measurment from hole to hole . i want to make sure its the same as the 07. im talking from left 2 holes to right 2 holes . im showing 32 inches. so if a 04-06 is 32 inches im set ..

also what do you 1500 guys measure . ??

hear is a ruff pic to show where im talking ...also does yours look like this ??
as you can see the holes are right behind the air dam .

 

if its for an 06 its will fit an 07 too i believe

 

also 1500 guys does yours look like this and can you get me a measurment ?? i may be able to fab a bracket for the 1500 bars if the measurment is close .

 

nope not by westins standereds called them already.

 

just looked at mine its about 3 1/4-3/8 spaced from the bolts

i have a pic if u want it too

 

ya shoot me a pic bullet but was needing the lenght from left to right .

 

ahh my bad i wont be home till later and it will be dark by then sorry man

 

Maybe this will help you 2006 Ram1500 4x2

 

Sorry man didn't really understand the question in the PM. Mine is an '06 and it measures 32 1/8" wide from center to center and 3 1/16" from top hole to bottom. There should be enough play in the bolt holes that you have no problem making it work. And the 1500 4x2 looks totally different. Hope that helps.

P.S. And yes, that is where the factory tow hooks are mounted.

 

thanks guys ..and that 4x2 was way off lol , mega your spot on looks like my brush bar will fit ...pics comming in a few days . thanks guys