DodgeForum.com

3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Anyone know what rims these are?

   
Old Apr 28, 2010 | 10:40 PM
Share
  #1  
WhiteRamTRX4's Avatar
WhiteRamTRX4
Thread Starter
|
Rookie
Joined: Feb 2010
Posts: 97
Likes: 0
Default Anyone know what rims these are?
http://www.ksl.com/emedia/slc/1980/1...r=ksl/gallery1

The guy doesn't know the brand and I'm trying to figure out the backspacing and offset and hopefully width too without having to drive 2 hours to look at them.

Thanks in advance
 
Reply
0
Old Apr 28, 2010 | 10:58 PM
Share
  #2  
Albertaramfan's Avatar
Albertaramfan
Captain
Joined: Aug 2009
Posts: 631
Likes: 0
From: Calgary, Alberta, Canada
Default
Looks to me they're the eagle alloys 064.

Great lookin wheel on our trucks. A local guy has a set on his 3500
 
Reply
0
Old Apr 28, 2010 | 11:07 PM
Share
  #3  
WhiteRamTRX4's Avatar
WhiteRamTRX4
Thread Starter
|
Rookie
Joined: Feb 2010
Posts: 97
Likes: 0
Default
Thanks!

I found them on this site.

http://www.tiresbyweb.com/p-7979-eag...me-wheels.aspx

Looks like they are 10" wide, 4.5 backspacing with a negative offset.

How far out will they stick? The further, the better for me
 
Reply
0
Old Apr 28, 2010 | 11:11 PM
Share
  #4  
Albertaramfan's Avatar
Albertaramfan
Captain
Joined: Aug 2009
Posts: 631
Likes: 0
From: Calgary, Alberta, Canada
Default
I'm not sure if they'll have the same backspacing as this guy but I'd say he sticks out a couple inches. Fills his pocket style flares nicely
 
Reply
0
Old Apr 28, 2010 | 11:16 PM
Share
  #5  
WhiteRamTRX4's Avatar
WhiteRamTRX4
Thread Starter
|
Rookie
Joined: Feb 2010
Posts: 97
Likes: 0
Default
So the same wheel can be made with different backspaces? For some reason I thought they made each rim in just one backspacing and offset.
 
Reply
0
Old Apr 28, 2010 | 11:24 PM
Share
  #6  
Albertaramfan's Avatar
Albertaramfan
Captain
Joined: Aug 2009
Posts: 631
Likes: 0
From: Calgary, Alberta, Canada
Default
His will be a little different because they're 8 on 6.5 bolt pattern.
I'm not sure if the backspacing changes however
 
Reply
0
Back to Subforum
3rd Gen Ram Tech
View Next Unread
AAnyone installed a 2 bar Map Sensor before???


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 03:45 PM.