3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Got my fastman TB today

Thread Tools
 
Search this Thread
 
Old May 1, 2010 | 04:26 PM
  #1  
chambers's Avatar
chambers
Thread Starter
|
Record Breaker
Joined: Dec 2008
Posts: 1,605
Likes: 1
From: VA
Default Got my fastman TB today

I went to the post office and picked it up and had it on in a little while, reset the pcm, let it idle a minute, and then went down the road to warm it up before I put my foot in it. Revved it up to 3k, dumped the clutch, and lit up the tires. Not bad for a V6. A few pics, sorry about the quality
 
Reply
Old May 1, 2010 | 06:04 PM
  #2  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default

Sweet. Nice mod. How's the idle/normal take off with the stick? Is is touchier than stock?
 
Reply
Old May 1, 2010 | 06:43 PM
  #3  
chambers's Avatar
chambers
Thread Starter
|
Record Breaker
Joined: Dec 2008
Posts: 1,605
Likes: 1
From: VA
Default

It's idling smooth and the take off seems better as I've gotten a little chirp from the tires a couple times where there's usually nothing. Hopefully hemifever can get everything straight w/ SCT so I can get a tune from him next.
 
Reply
Old May 1, 2010 | 07:31 PM
  #4  
Off_Road_Teacher's Avatar
Off_Road_Teacher
Banned
Joined: Sep 2005
Posts: 7,759
Likes: 1
Default

Nice mod, dan makes a nice product.
 
Reply
Old May 2, 2010 | 09:24 AM
  #5  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

Just curious, did you get a tapered bore or a full bore?
 
Reply
Old May 2, 2010 | 10:47 AM
  #6  
chambers's Avatar
chambers
Thread Starter
|
Record Breaker
Joined: Dec 2008
Posts: 1,605
Likes: 1
From: VA
Default

I'm not sure, I just sent him the order and told him my mods and future plans for the truck and he did it and sent it to me. I believe the standard TB is tapered on the front down to smaller size and the fastman one was not, but I'm not sure if it was ported out the same on the back side of the butterfly.
 
Reply




All times are GMT -4. The time now is 05:17 PM.