When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Looks good man! I'd like to do this myself. What did you do differently this time than the last time so that you won't get any chipping?
i think it was the two primers that pretty much the key along with making sure the piece is clean before you spray them. mine started chipping about a year later but all i used was adhesion promoter the first time. then i broke down and just had them professionally shot lol
i think it was the two primers that pretty much the key along with making sure the piece is clean before you spray them. mine started chipping about a year later but all i used was adhesion promoter the first time. then i broke down and just had them professionally shot lol
So what is the benefit of using a "self etching primer" with this type of application? I Thought this was mostly for use with bare metal type situations.
i think it was the two primers that pretty much the key along with making sure the piece is clean before you spray them. mine started chipping about a year later but all i used was adhesion promoter the first time. then i broke down and just had them professionally shot lol
Yep i did the same thing last time lol
I made sure i went all out this time to make sure it lasts.
oh and silver i used pliers to twist my chrome ring off
