Dirty dog thanks for the comment!

 

i got em up man i was in the process of uploading and i posted then edited my post jump on it dog....glad your on it though....and yes lucky you do have a badass truck...but you got a hemi...i got a badass4.7 like it or not i know it....

 

Hells yes his truck is awesome! All that deployment money. Hey DT how did it run on the beach yesterday?
I'm going to bring that bracket material tomorrow. Total I've maybe used about 12 inches of it to mount the fan. Zip ties do wonders and I was considering using them all the way around but didn't want to put too much strain on the radiator fins. Pics below:

http://s880.photobucket.com/albums/a...8/E-fan%20Mod/

 

Sounds good i will i put up pics next weekend throughout the install. The sand was a scary trip i didn't go out too far, but just far enough to say it didn't get me again!

 

Good thing. That would have been really bad.. I saw that wrecker yesterday before you came out. Pulled out some minivan stuck in the sand across from my house. That's an expensive mistake.

 

Glad to see you got everything connected and going man.

 

my efan thread turned into a off topic thing..please back on topic...im all buttoned up now and i think i got the temp set right...wire loomed the spare wires, but instead of me using the power wire of the fan for my led, i used the spare blue wire that came off the controller, it has power when the controller turns on. perfect for the led only worry is no fuse between the led and controller i wonder if it will burn up? everything is pretty and loomed and can barely tell i did any modification under there...now i just need some 3/4 loom to hide my power wire for my amp and the other 2 wires running into my cab for lights.....love the fan i dunno if i see a noticeable gain yet or not, but im sure ill find love for it....i seem to be running a lil hot so when i got home i adjusted it a lil so hopefully it will run cooler, near future very near as its only about 7 bucks is a 180* tstat to help out with the rest of my stuff....heres a cpl pics of the led and it comes on right where you see the temp gage in the same pic....and just for frog another all loom pic.....

 

Your wiring looks a whole lot better than mine. I zip tied it all down. I'm just thinking about covering it up with electrical tape to further protect it. I have the 180* t-stat and while I'm driving the temp gauge sits about 1/4 (181-183* cruising). In stop and go traffic/idling it goes up to 188-190* and maybe 192* when it's really hot.

 

Yeah that's about right my 99 had one it along with alot more mods but I'm catching this one up it's def gonna be done here shortly as it almost goes hand in hand with the efan... Blake just goto ur local parts store and get the loom like I did it's easy honestley I grabbed a chit ton when I went to the junk yard off about ten cars cause I use it all the time I just didn't think to grab some thick stuff.

 

Wel done....
Looks good....