so ive got the lights all mounted, just need to be wired, but i took off the passenger a pillar and there is no harness under it (all the directions/videos say there would be) its an 02. But there is one under the drivers side, just has a lot more wires in it. Does anyone know another wire i can tap into, perhaps somewhere under the dash? any wire that controls a night light i think would work.. thanks everyone

 

never seen a Ram without the wires in the passenger pillar.

But you got another one you can use that's easy to get to. In the pop out panel on the drivers' side of the dash (you have to have the door open to see it), there is an orange wire that is hot when you turn the driving lights on. It's the one commonly used for gauge lights when you put a gauge in the driver side pillar...