Just wondering, if someome happens to have a picture or drawing for the crank tone wheel on a 2003 3.7 Ram 1500? I need to see the lay out of the teeth setup on one. I've got the JTEC system. I've tried to count them by holding my finger in the sensor hole and rotating the engine. After doing it five times, I'm still getting the same count. 14 teeth. And I can't feel anything broken off or missing.
I sure would hate to pull that thing out again.

 

Maybe go by the auto parts store and see if they have one you can look at?

 

I've tried. Parts stores don't stock them and the Dodge dealers books say, "Not sold serperate, Crankshaft and wheel sold as unit".

Thanks anyways.

 

can you drop the pan and rotate and count that way?

 

I know this is a 4.7 but maybe this will help or you could call Nick and maybe he could help.

http://www.airram.com/product.php?ca...productid=1482

 

I was hoping to keep from doing that. I'm just taking a little break, to get my mind together. I finish up on the riding mower, I will go ahead and drop the pan. It won't take long to do it. Will let you know what I find.