Dammit man......its looking good

 

Dammmmnnn!!! It almost looks as good as my truck Matt

 

so how are the spindles working out??? any clearance issues or rubbing from the spindles? would you say 100% to get them for my 06 2wd??? thanks. truck looks so awesome

 

Thanks guys and they are a 100% fit and actually easier than spacers

 

Tell that to your ankle.

 

I still have a hole in my leg from infection after two rounds of abx and Ag packing. The doctors wouldn't give me abx for three checkups and I finally had to get an MD from my hospital to write me some

Btw, my bill is right at $2k. That's a nice lift lol

 

about how far a difference did the new shackles make?

also, that **** hurts, i feel your pain man, ive been there, but anyway, at least you're ok... and that is a SEXY truck.

 

Damn. Its cheaper just to cut the ankle off!! LOL

 

the shackles gave me about 2in. I liked them, I think its less noticeable than an extra 2in of block and they fit great

 

Matt, great write up, it motivated me to do the same.

Attemped an instal of the Suspension Maxx 4'' spindles on my 07 2wd ram today. I bought new ball joints and shocks for the install, figured it would not be that much more work, wrong! The lower ball joint does not want to come out of the control arm. I had a very large ball joint press with the correct adapter and could not get it budge at all. I put a torch to it and still no luck.

I suppose the next setp is to remove the lower control arm and have it pressed out and the new one pressed in.

Anyone have experiance removing the lower ball joint on a 3rd gen ram? I guess I should expect the same with the upper control arm as well.