3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

p0750

Old May 14, 2011 | 04:17 PM
  #1  
work truck's Avatar
work truck
Thread Starter
|
Registered User
Joined: Apr 2011
Posts: 8
Likes: 0
Default p0750

Hi all
I have a 1500 4.7 2 wheel dr.
Engine light came on and it read p0750 shift solenoid A
So I purchased a soleniod from dodge and the filters and fluid.
Replace solenoid pack filters and fluid.
$500 later and same code popped up as soon as I was over 20 mph.
The truck will shift manualy and seems to be stuck in drive.
I can drive it as long as I shift it into 2nd at each stop then up in to drive.
I have done this for two weeks now and have put about 100 miles on it.
I have read some where that this could be caused by an 02 sensor faulting and the shift solenoid not getting proper power so I changed the 02 sensors but same thing.
Any ideas, I would like to have the truck shift by itself again.
Thanks in advance
 
Reply
Old May 17, 2011 | 10:49 AM
  #2  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

This this info from Mitchell

http://cid-fb87bd8396fbfbf4.office.l...00%20P0750.pdf
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:08 AM.