Hi Newbie to the Forum here... I'm looking for a schematic to the power steering pump on a 2003 ram 2500. What I have done is remove the hi-pressure hose from the bottom of the pump and with it took out a sleeve with a spring and a small grooved cylinder. They kinda fell out as I was removing the rusted Hi-pressure hose from the body of the pump. So what I need to find is how to put these parts back inside and what order/ arrangement.

Anyone played with a pump before and gone and done this?

I'm not new to fixing dodges as I have used this forum in the past for answers to many mind boggling questions.

Any advice would be great especially if you have an old pump thats laying around...I'd like to see how the parts go back together in the pump housing. I'll have pics to post soon of what I'm looking at.

Does not have hydro-boost .

Any help would be greatly appreciated.

-Moatswimmer
'03 ram 2500 with 60k miles on the clock