Hey Guys: My son started up his Ram, drove it a block, and the thing died in the street. Cranks over great, (new batteries), drained the water seperator on the fuel filter, primed the engine according to the owners manual, and still no start. No codes on my scanner came up. Set the Bullydog programer back to default. Checked the fuses under the hood, and found nothing bad. I am looking for suggestions. Any help appreciated.

Dave

 

when is the last time the fuel filter was changed? fuel pump working?

 

lift pump in the tank, or the high pressure pump on the engine

Before you go too far in the dark, get the FSM from Weedahoe in his sig. It will really help track it down