My mother has a pre owned 03 ram 1500. The guy that had it before she got it thought he knew what he was doing when he wired in a remote start and alarm kit. I ripped it all out and reconnected all the factory wires as they should be. Everything is wired like it should be, nothing extra.

This brings me to my problem; when the key is out of the ignition, there is no power to anything, no flashers, no cab light, no nothing.

What in the world could it be?

I cant even begin to describe the wiring mess that was in there from not only the remote start and alarm, but also from a very bad amp/woofer/video screen job....
But like i said, everything is back to factory. No bare wires, no loose wires, just no constant hot when the key is out of the ignition.

 

Thinking u missed a power wire somewhere recheck the ignition

 

check the fuses in the pdc under the hood first, may have just let the smoke out on one.

Maybe fuse 20

 

I agree with fuses might have burnt out, but it would help to know which brand and model Remote start was installed in there.

Let us know.