installed a bulldog remote start on my 05 dodge ram with no security, but has auto locks, does anybody know how I would go about wiring up the locks to the remote start and use the remote start keyfob to lock and unlock, on the wiring chart it says it is a 1 wire lock and unlock but cant confirm that, also the remote start has built in relays for the locks, any help would be greatly apreciated

 

Welcome to the site. I did my own alarm and remote start but that was a long time ago so I really can't even remember where to start other than telling you to go look over on www.the12volt.com

 

do you remember if you hade to add resisters to your locks? like I said the remote start already has the relays built in?

 

Hi,I installed one on my 01 Dodge back in the day, you should be able to down load the wiring diagram for you truck from the Bulldog website. If your unit has the build in relays it should be pretty easy. I remember finding the wires in the harness that gos to the drivers side door. Good luck

 

Yeah, I remember buying some from Radio Shack.

 

put the right resistors in and the locks are working like a charm!