3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

fuse box(es)

Thread Tools
 
Search this Thread
 
  #1  
Old 01-17-2014, 09:37 AM
Floyd Hartley's Avatar
Floyd Hartley
Floyd Hartley is offline
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default fuse box(es)

I need help locating the fuse box(es) in the 2004 ram 2500. Also have a problem with door locks, internal cab lights. Won't work unless ignition is on.Also heater blowing motor works but no heat, directional, heated mirror button and a/c button are not working. All of these happen when trying to hook up new radio.
 
  #2  
Old 01-17-2014, 12:39 PM
eviljoker's Avatar
eviljoker
eviljoker is offline
Registered User
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

this thing happened to me like 4 days ago... I check every fuse all of them was good... under the fuse box I notice the was a couple of broken wires.. one of then red the one for the lights and everything inside ... After that I don't have to open the switch to have power inside ... I hope this can give u a idea .. srry for my English..
 
  #3  
Old 01-17-2014, 03:55 PM
Floyd Hartley's Avatar
Floyd Hartley
Floyd Hartley is offline
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I have checked all wires and connections. All seems to be ok.
 
  #4  
Old 01-17-2014, 08:00 PM
eviljoker's Avatar
eviljoker
eviljoker is offline
Registered User
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

fuse box(es)-forumrunner_20140117_195122.jpg



I take off a couple wires because it was rusty.. I replace a couple new wires
 
  #5  
Old 01-17-2014, 08:00 PM
eviljoker's Avatar
eviljoker
eviljoker is offline
Registered User
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
  #6  
Old 01-17-2014, 09:13 PM
gcburkett's Avatar
gcburkett
gcburkett is offline
Veteran
Join Date: Feb 2011
Location: Chicago suburbs
Posts: 437
Likes: 0
Received 1 Like on 1 Post
Default

Check all fuses that go to the cluster. If the fuses to the cluster are not bad then an electrical diagnoses of the cluster. There is a line going from the cluster to the radio and I would suspect that you shorted the wire. This is for controlling the lights on the radio.
 



Quick Reply: fuse box(es)



All times are GMT -4. The time now is 08:26 AM.