When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
3" body would fit, but if it were me I'd at least crank the torsion bars about an inch and half or so at the same time. Will give a more level appearance and allow full lock to lock turn with 35s plus it's FREE (except for the alignment you'll need)...
3" body would fit, but if it were me I'd at least crank the torsion bars about an inch and half or so at the same time. Will give a more level appearance and allow full lock to lock turn with 35s plus it's FREE (except for the alignment you'll need)...
