3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

ram 1500

Thread Tools
 
Search this Thread
 
Old Nov 3, 2014 | 09:54 PM
  #1  
dodge15002's Avatar
dodge15002
Thread Starter
|
Registered User
Joined: Nov 2014
Posts: 5
Likes: 0
Default ram 1500

im getting these codes p052 p053 p054 p056 what does this mean
 
Reply
Old Nov 3, 2014 | 10:32 PM
  #2  
Prismatic's Avatar
Prismatic
All Star
10 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Dec 2012
Posts: 895
Likes: 56
Default

Originally Posted by dodge15002
im getting these codes p052 p053 p054 p056 what does this mean
p0052 - Oxygen (A/F) Sensor Heater Control Circuit High (Bank 2 Sensor 1)
p0053 - HO2S Heater Resistance (Bank 1 Sensor 1)
p0054 - HO2S Heater Resistance (Bank 1 Sensor 2)
p0056 - HO2S Heater Control Circuit (Bank 2 Sensor 2)
 
Reply
Old Nov 4, 2014 | 08:58 AM
  #3  
dodge15002's Avatar
dodge15002
Thread Starter
|
Registered User
Joined: Nov 2014
Posts: 5
Likes: 0
Default

What can I do to fix these ? Is this why my truck is stalling out ? Bank 2 isn't firing any of the cylinders
 
Reply
Old Nov 4, 2014 | 12:05 PM
  #4  
Izero's Avatar
Izero
Champion
Joined: Aug 2006
Posts: 4,489
Likes: 4
From: New Jersey
Default

replace your oxygen sensors..... If you still get codes it's time to check your spark plugs, and replace them if needed... if that still doesn't fix it, then it is time for a compression and leak down test.
 
Reply
Old Nov 4, 2014 | 02:33 PM
  #5  
dodge15002's Avatar
dodge15002
Thread Starter
|
Registered User
Joined: Nov 2014
Posts: 5
Likes: 0
Default

Would this cause bank 2 not to fire ?
 
Reply
Old Nov 4, 2014 | 04:50 PM
  #6  
Izero's Avatar
Izero
Champion
Joined: Aug 2006
Posts: 4,489
Likes: 4
From: New Jersey
Default

not really... but it could put you into limp mode after the warm-up cycle, which causes some funky stuff to happen...

Replace the O2 sensors and see where you're at.
 
Reply




All times are GMT -4. The time now is 07:43 PM.