Hey guys I'm sure this has been asked before but couldn't find anything. Does anyone have some insight on leveling kits. Gonna have my front torn apart for control arm, ball joint, tie rod replacements and figured since was already apart I would put one in. Any recommendations? I also seen the ones for the torsion bars are those better compared to the spacers normally used.
07 1500 4.7 QC 4x4 thanks yall

 

Torsion bar front end 4x4 1500s were '03-'05. These could be leveled simply by adjusting the torsion keys and didn't need a leveling kit even though "kits" are sold.

You have a coil front end and would have to use coil spacers or purchase longer coils. You also should purchase longer shocks and have an alignment done after leveling...

 

Look into bilstien leveling shocks.

 

Using adjustable shocks like Bilstein is an easy method to level your rig.