3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

06 Ram 3500 Vibration in overdrive

Thread Tools
 
Search this Thread
 
Old Sep 13, 2015 | 11:14 PM
  #1  
fltoolman's Avatar
fltoolman
Thread Starter
|
Registered User
Joined: Sep 2015
Posts: 1
Likes: 0
From: Florida
Default 06 Ram 3500 Vibration in overdrive

Hello all I'm new to the forum site mainly because I'm new to dodge as of last week and every thing else I have is GMs. I have looked on here and haven't found my problem the ones similar I saw where with gas engines if I missed it sorry I tried not to start a thread. Here's what I got going on.

2006 dodge ram 3500 4x4 5.9l diesel auto trans 230k miles quad cab long bed, I have a vibration in the cab/seat in overdrive. when driving and it shifts into od it vibrates it stops when you press the accelerator or let off or push the tow it stops its only when the accelerator is at a position that maintains speed. I just changed the u joints and center support Bering in the rear shaft and its still the same.
what could it be?
 
Reply
Old Sep 14, 2015 | 11:52 AM
  #2  
p38251's Avatar
p38251
Record Breaker
Joined: Feb 2011
Posts: 2,001
Likes: 0
From: Vanderpool Texas
Default

Possible you have a torque converter issue. Or the trans may need work. Have you checked the condition of the fluid. Color should be bright red. Smell. Does it smell burnt. Maybe do a pan drop to check for excessive clutch material. Filter condition. You could try a service, may or may not help.
 
Reply




All times are GMT -4. The time now is 10:59 PM.