3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Wheel/Hub Bearing: OEM vs. MOOG

Thread Tools
 
Search this Thread
 
Old Sep 22, 2015 | 11:10 AM
  #1  
RamedHemi's Avatar
RamedHemi
Thread Starter
|
Professional
15 Year Member
Joined: Aug 2009
Posts: 247
Likes: 2
Default Wheel/Hub Bearing: OEM vs. MOOG

Hi Guys. I recently discovered my left front hub is shot and really lose. So bad that I cannot drive it. When I got home from work last week jacked it up the wheel was barley on there.


I have heard of MOOG being one of best for front ends parts.I ended buying a OEM Mopar on ebay for $94 shipped. Can’t beat that when thedealer wants 2$272. Any thoughts on going with OEM vs. MOOG and any experiences. Justwant to know in case I have to do the other side. Thanks!
 
Reply
Old Sep 22, 2015 | 11:21 AM
  #2  
SmokinJoe02's Avatar
SmokinJoe02
Veteran
Joined: Feb 2013
Posts: 470
Likes: 0
From: TEXAS
Default

You'll be fine with either. Just don't buy the cheaper ones from rockauto. I've had bad luck with many of those sets. Next time, I'm going with either OEM or MOOG.


SJ03
 
Reply
Old Sep 22, 2015 | 12:09 PM
  #3  
TejasMtnBiker's Avatar
TejasMtnBiker
Captain
Joined: Mar 2005
Posts: 663
Likes: 0
From: Dallas
Default

autozone duralast, but re-used the oem sensors. I just hope they were packed with good grease & not vaseline lol
 
Reply
Old Sep 22, 2015 | 04:05 PM
  #4  
RamedHemi's Avatar
RamedHemi
Thread Starter
|
Professional
15 Year Member
Joined: Aug 2009
Posts: 247
Likes: 2
Default

Yea I here that man! I hear MOOG is now made over seas. Maybe quality isn't there anymore. Happy I went mopar..... so far. LOL
 
Reply




All times are GMT -4. The time now is 12:55 PM.