3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Power windows

Thread Tools
 
Search this Thread
 
Old Mar 19, 2016 | 05:38 PM
  #1  
Sarah Smiley's Avatar
Sarah Smiley
Thread Starter
|
Registered User
Joined: Mar 2016
Posts: 1
Likes: 0
Default Power windows

Our back power windows stopped going up. You can roll them down from the back switches but the door has to be in a certain spot to get them back up. Also the controls on the drivers door do not work at all for the back windows. The controls on the driver door does keep the back from working with the lock button and it still controls the driver side window. When you open the back door the interior lights don't come on either. What could be the issue. Help please
 
Reply
Old Mar 19, 2016 | 06:24 PM
  #2  
p38251's Avatar
p38251
Record Breaker
Joined: Feb 2011
Posts: 2,001
Likes: 0
From: Vanderpool Texas
Default

Read out the wires. Sounds like you may have a pinched wire. Usually in the door jam between the truck and the door.
 
Reply
Old Mar 19, 2016 | 08:14 PM
  #3  
Chet Ubetcha's Avatar
Chet Ubetcha
3rd Gen Ram Moderator
Joined: Jul 2005
Posts: 1,596
Likes: 16
From: Cádiz, Spain
Default

Sounds like it's isolated to that back door, which leads me to think it's wiring from that door only. That's where I'd start my troubleshooting.
 
Reply




All times are GMT -4. The time now is 07:58 AM.