3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

02 4.7l Intake manifold swap with 07

Thread Tools
 
Search this Thread
 
Old May 8, 2018 | 03:29 PM
  #1  
02ramman1500's Avatar
02ramman1500
Thread Starter
|
Registered User
Joined: May 2018
Posts: 1
Likes: 0
Default 02 4.7l Intake manifold swap with 07

Hello,
I own a 2002 Ram 1500 SLT QC 4X4 with 80k miles.
The engine was rebuilt at 78k and has run great since. but I am looking for more power
I currently have on it Superchips F5, Intake Scoop, Airram Power Wire, AND Swapped my TCM with an '02 GC TCM.
after the swap of TCM my mpg shot up especially on highway averaging 22mpg. 2000rpms at 85mph (looking to get 4.10s eventually to even this out)
I am looking for more power and plan to port my Throttle Body to 72mm, want to put a intake manifold on (why I'm wondering about the swap) and then an exhaust kit.
I have tried to few Ram Truck forums but no one has ever taken the 07 and placed it on 02. but the reason I want to use the '07 intake manifold over the popular 08 intake manifold it requires an adapter that cost 400, and the 08 intake cost more itself. The money is not worth the power to me.
I've found 07 intake manifolds that have 3 bolt pattern but was wondering about all the technical stuff, will I need to change ECM and harness? Anything that might cause a hangup?
Any help is greatly appreciated.
Thanks
 
Reply
Old May 9, 2018 | 12:09 PM
  #2  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default

I thought this sounded familiar, I answered your last question over on the other forum. Wrong link. Search for a 4th gen one you'll find one for sure.
 
Reply




All times are GMT -4. The time now is 04:03 PM.