PCM/ECM.. Who likes electrical?!
Hi all
I have a 2005 Dodge Ram 1500 with the following issues. Some occur randomly (x), most are constant.
ABS and E brake is illuminated in the dash cluster
-round (illuminated) security light in the dash cluster comes on and buzzes *no security system on the truck
Cruise Control stopped working
Radio does not power up
Auto (remote) door locks stopped working unless the truck is running
Dome light does not come on
OBDII port does not work / does not power service meter
(x)Loss of DC power / power to engine while driving
(x)Hazard lights / switch intermittently work
(x)Windshield wipers will turn on by themselves
(x)Turn the key to start / crank nothing happens
As I am sure most can appreciate, I have done quite a bit of research and troubleshooting based off of those searches; fuses, battery, plugs, contacts, pins on mulex connectors, etc., Some people have had various levels of success in resolving any issue(s), I have not. What I believe I have narrowed my issues down to would be the PCM/ECM, I am a little apprehensive of throwing parts at something that I am not able to fully troubleshoot.
Any feedback is appreciated!
I have a 2005 Dodge Ram 1500 with the following issues. Some occur randomly (x), most are constant.
ABS and E brake is illuminated in the dash cluster
-round (illuminated) security light in the dash cluster comes on and buzzes *no security system on the truck
Cruise Control stopped working
Radio does not power up
Auto (remote) door locks stopped working unless the truck is running
Dome light does not come on
OBDII port does not work / does not power service meter
(x)Loss of DC power / power to engine while driving
(x)Hazard lights / switch intermittently work
(x)Windshield wipers will turn on by themselves
(x)Turn the key to start / crank nothing happens
As I am sure most can appreciate, I have done quite a bit of research and troubleshooting based off of those searches; fuses, battery, plugs, contacts, pins on mulex connectors, etc., Some people have had various levels of success in resolving any issue(s), I have not. What I believe I have narrowed my issues down to would be the PCM/ECM, I am a little apprehensive of throwing parts at something that I am not able to fully troubleshoot.
Any feedback is appreciated!



