Whining Noise
Thread Starter
|
Rookie
Joined: Feb 2012
Posts: 57
Likes: 0
From: New Jersey
Whining Noise
I have a 04 Rumble Bee 4x4 5.7 HDMI.
My problem is a whining noise as thoigh I have large aggressive tires. I rotated the tires, lowered tire pressure., checked wheel bearing which are fine, and whining noise still there. The only thing I found was that I need ball Joints on driver side. Can't pin point location were the noise is, I have dual flowmaster 10's installed. I also checked fluid level in front and back differenials. I'd appreciate it if someone can give me there thoughts on this.
My problem is a whining noise as thoigh I have large aggressive tires. I rotated the tires, lowered tire pressure., checked wheel bearing which are fine, and whining noise still there. The only thing I found was that I need ball Joints on driver side. Can't pin point location were the noise is, I have dual flowmaster 10's installed. I also checked fluid level in front and back differenials. I'd appreciate it if someone can give me there thoughts on this.
