3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Stumped

Thread Tools
 
Search this Thread
 
Old Nov 26, 2018 | 06:37 PM
  #1  
discusmike's Avatar
discusmike
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 6
Likes: 0
Default Stumped

earlier in the summer while towing my boat my 03 ram with a 4.7 began to idle erratic and feel like it was missing,the engine wanted to stall if I did not give it some gas,the next day the truck ran fine.A few weeks ago my tail lights went out,fuses and relay were fine,i Bipassed the relay and they worked fine,just this past weekend the truck began to miss and idle erratic again,throwing tpi and oxygen sensor codes.I replaced the sensors but it’s still showing a tpi code and idleing erratic,a random misfire code came up also but went away,is my FMP going bad???anyone had this problem??any help would be much appreciated,it’s xmass and I don’t have extra money to keep dumping in the truck if it’s not going to fix the problem,thanks
 
Reply
Old Nov 26, 2018 | 06:40 PM
  #2  
discusmike's Avatar
discusmike
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 6
Likes: 0
Default

FMC,sorry about spelling
 
Reply
Old Nov 26, 2018 | 09:12 PM
  #3  
discusmike's Avatar
discusmike
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 6
Likes: 0
Default

Front control module😵
 
Reply




All times are GMT -4. The time now is 12:51 PM.