3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Question about SRT-10 Ram Brakes

Old Feb 11, 2006 | 12:31 AM
  #1  
moparrtguy's Avatar
moparrtguy
Thread Starter
|
Veteran
Joined: Dec 2005
Posts: 267
Likes: 0
From: Peoria, Az
Default Question about SRT-10 Ram Brakes

Will the SRT-10 Ram Calipers fit on a Ram 1500 without major modification? I asked my local dealer and they had no idea. I was looking into switching out my standard calipers for the SRT's or sending my calipers out for power coat.
 
Reply
Old Feb 11, 2006 | 06:48 AM
  #2  
silvernightmare's Avatar
silvernightmare
Veteran
Joined: Dec 2005
Posts: 464
Likes: 0
From:
Default RE: Question about SRT-10 Ram Brakes

I do not think that they will fit the rotor is probably a lot larger. You best bet would to get your calipers powder coated or go with a set of Baer (I believe they are red as well).
 
Reply
Old Feb 11, 2006 | 12:34 PM
  #3  
moparrtguy's Avatar
moparrtguy
Thread Starter
|
Veteran
Joined: Dec 2005
Posts: 267
Likes: 0
From: Peoria, Az
Default RE: Question about SRT-10 Ram Brakes

I wasnt worried too much about the rotors, I will be replacing those with drilled / slotted rotors anyway so I can get the bigger size. I was just concerned about a direct bolt on for the caliper.


ORIGINAL: silvernightmare

I do not think that they will fit the rotor is probably a lot larger. You best bet would to get your calipers powder coated or go with a set of Baer (I believe they are red as well).
 
Reply
Old Feb 11, 2006 | 02:42 PM
  #4  
HankL's Avatar
HankL
Champion
Joined: Aug 2005
Posts: 3,313
Likes: 8
Default RE: Question about SRT-10 Ram Brakes

brake conversion a Durango
but certainly worth a read
for both the good and bad:

http://makeashorterlink.com/?R31921F9C
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:27 PM.