ive got an 05 QC 1500 Hemi Laramie 2wd and im wanting to put on some tow hooks. after looking at the front bumber set up ive noticed that my damn brush guard mounts on one of the holes that is needed for the mopar1500 tow hooks. i prefer the 2500/3500 hooks but im thinking im going to have to settle for the 1500's. i think if i basically get a piece of pig iron and drill some holes in it so it will be a flush mounting surface some 1500 hooks will work. please help me out here if you guys have any opinion or anyone has done it or has an idea. thanks in advance guys!
By the way in case you were wondering, all that yellow crap to the right of the bolt was a giant dead moth that exploded when it hit, that bastard was caked on there, took me like 10 min to scrape him out!

[IMG]local://upfiles/26156/0F2F4A5213D44E9B9D78A6E06871EA6E.jpg[/IMG]

[IMG]local://upfiles/26156/35991F0BF5CC459FB14BDD7C66749842.jpg[/IMG]

 

I wish I could help, but when I had my grille guard put on, the tow hooks had to go.

 

IT CAN BE DONE! i found this pic on another website! any ideas?


[IMG]local://upfiles/26156/3F9E06F436C14F128B7C9ED7E8F898CE.jpg[/IMG]

 

I think it depends on the brand of grille guard. My WAAG guard wouldn't allow the tow hooks to stay on the truck.