Help
RE: Help
In the FSM, group9, page 458.
From what the FSM explanation says, it looks like the sweep on the egr sensor is reading high voltage.
Replace the EGR valve, you can't break into it to do anything. What you might try first though, is to pull the electrical plug to the EGR solenoid, clean it, re-connect. Pull the PCM fuse to reset the code and see if it comes back. If it does, replace the EGR Valve. And again reset the PCM.
From what the FSM explanation says, it looks like the sweep on the egr sensor is reading high voltage.
Replace the EGR valve, you can't break into it to do anything. What you might try first though, is to pull the electrical plug to the EGR solenoid, clean it, re-connect. Pull the PCM fuse to reset the code and see if it comes back. If it does, replace the EGR Valve. And again reset the PCM.
Veteran
Joined: Oct 2003
Posts: 440
Likes: 0
From: United States
RE: Help
ORIGINAL: Gone Fishin
In the FSM, group9, page 458.
From what the FSM explanation says, it looks like the sweep on the egr sensor is reading high voltage.
Replace the EGR valve, you can't break into it to do anything. What you might try first though, is to pull the electrical plug to the EGR solenoid, clean it, re-connect. Pull the PCM fuse to reset the code and see if it comes back. If it does, replace the EGR Valve. And again reset the PCM.
In the FSM, group9, page 458.
From what the FSM explanation says, it looks like the sweep on the egr sensor is reading high voltage.
Replace the EGR valve, you can't break into it to do anything. What you might try first though, is to pull the electrical plug to the EGR solenoid, clean it, re-connect. Pull the PCM fuse to reset the code and see if it comes back. If it does, replace the EGR Valve. And again reset the PCM.