3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

03 ram front end ht.

Old Aug 21, 2006 | 02:25 AM
  #1  
jsub's Avatar
jsub
Thread Starter
Joined: Aug 2006
Posts: 13
Likes: 0
Default 03 ram front end ht.

anyone know what the front and rear end height difference is on a 2003 ram 1500 2wd laramie edition?
the low front end drives me crazy!!!!!
 
Reply
Old Aug 21, 2006 | 03:30 AM
  #2  
kvsmith2004's Avatar
kvsmith2004
Veteran
Joined: Jan 2006
Posts: 390
Likes: 0
From: San Diego CA
Default RE: 03 ram front end ht.

Do you need to find out because you are looking into leveling it out?
 
Reply
Old Aug 21, 2006 | 03:41 AM
  #3  
jsub's Avatar
jsub
Thread Starter
Joined: Aug 2006
Posts: 13
Likes: 0
Default RE: 03 ram front end ht.

im debating on whether to level it out, lift it, or lower it.
i think my truck sits a little lower than average on the back end as well, thats why im contemplating gettin it lifted
 
Reply
Old Aug 21, 2006 | 03:51 AM
  #4  
kvsmith2004's Avatar
kvsmith2004
Veteran
Joined: Jan 2006
Posts: 390
Likes: 0
From: San Diego CA
Default RE: 03 ram front end ht.

Well if you want to lift the front up there are a few things from coil spacers to new springs, I am not sure where you would be able to get a good measurement on the diffrence between the front and the back. Someone here should know though.
 
Reply
Old Aug 21, 2006 | 12:52 PM
  #5  
Ram_Sport's Avatar
Ram_Sport
Record Breaker
Joined: Aug 2005
Posts: 1,196
Likes: 0
From: St.Clair, MI
Default RE: 03 ram front end ht.

i think he wants to know the difference like the back is so many inches higher then the front, so would it be easier to jsut get a 2 inch spacer or lift would make it level and better
 
Reply
Old Aug 22, 2006 | 12:45 AM
  #6  
kvsmith2004's Avatar
kvsmith2004
Veteran
Joined: Jan 2006
Posts: 390
Likes: 0
From: San Diego CA
Default RE: 03 ram front end ht.

Ok so would you just need to take how high the rear bumber is then the front and see the diffrence?
 
Reply
Old Aug 22, 2006 | 12:50 AM
  #7  
redram5.9's Avatar
redram5.9
Registered User
Joined: Jul 2006
Posts: 39
Likes: 0
From:
Default RE: 03 ram front end ht.

I believe it would be easier to measure from the middle of the fenders. Go from the middle of the wheel up.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:49 PM.