37 in tires on stock powerwagon
#13
#14
#15
RE: 37 in tires on stock powerwagon
Like I said in the post. By cuttinig the front fender on the back side it gave me an extra 1-3/4" of room between the tire and the fender. It actually centered the tire in the opening. You can't tell that I did the deed, But if you put my truck next to a stock power wagon and intentionally look at this location you will notice the difference. I personally think it was brilliant. I did not compromise any structure or asthetics by doing this. I also did not have to put a radical/ expensive lift to fit the tires. To me the ride is awsome, and I don't see any difference in performance.I am not a lead foot so my everday street driving feels the same. My off roading is mostly in mud in 4 low. with the low range in the mud I am kicking *** and taking names !!!!! I highly reccomend this mod. The biggest draw back is the over $1,500.00 it cost for tires (ouch).
#16
#17
RE: 37 in tires on stock powerwagon
Thanks Mystro.
Last night I saw a stock 06 power wagon. I had to park next to it and get a pic. Too bad there was a car parked between us. This wil give a little bit of a feel for the difference in the look.When I get a little free time I will take off the fender flare and post a pic of the minor fender operation.
[IMG]local://upfiles/48655/13DC6A26DA9B4A8EB580D7BFE8652529.jpg[/IMG]
Last night I saw a stock 06 power wagon. I had to park next to it and get a pic. Too bad there was a car parked between us. This wil give a little bit of a feel for the difference in the look.When I get a little free time I will take off the fender flare and post a pic of the minor fender operation.
[IMG]local://upfiles/48655/13DC6A26DA9B4A8EB580D7BFE8652529.jpg[/IMG]
#19