3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

tail light wiring

Thread Tools
 
Search this Thread
 
  #1  
Old 12-25-2006, 09:23 PM
loiler921's Avatar
loiler921
loiler921 is offline
Professional
Thread Starter
Join Date: Jun 2005
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default tail light wiring

Hey guys,

Quick question....i just bought the fire and ice light bar. thing is sick but i need to know which wire on the tailight harness is the wire for the backup light> If you are familiar, each of the 3 bulbs dont have a wire to it but they are all connected to a 5 pin harness. One of the wires i blieve is the Ground (black). All the otheres are wierd color combo wires. nonetheless idk which one is for the back up's.

Inputs please>>>
 
  #2  
Old 12-25-2006, 11:59 PM
al_srt10's Avatar
al_srt10
al_srt10 is offline
Join Date: Oct 2006
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default RE: tail light wiring

The fire and ice bar (plasmaglow) i put on my 2006 came with a 4 pin trailer harness along with a separate white wire which ran the back up lights. I didn't want to cut into the truck wiring so i picked up a 7 pin trailer connector and spliced the wiring from the bar onto the 7 pin connector.
On mine the reverse lights connect up to the center pin of the 7 pin harness...

Good luck with your bar, they're sweet...

 



Quick Reply: tail light wiring



All times are GMT -4. The time now is 12:14 AM.