3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Sloppy Steering

Thread Tools
 
Search this Thread
 
  #1  
Old 03-14-2010 | 08:28 PM
Slowhand12's Avatar
Slowhand12
Thread Starter
|
Registered User
Joined: Feb 2010
Posts: 22
Likes: 0
From: Pennsylvania
Default Sloppy Steering

Hello I was wondering if anyone else has or had this problem. I Practically replaced my whole front end.Upper and Lower ball joints and tie rods, plus both hubs. My problem is it STILL wonders on the road. Does anybody have any other Ideas.
Thanks for Your Help
Slowhand12
 
  #2  
Old 03-14-2010 | 08:55 PM
05RamMan's Avatar
05RamMan
Captain
Joined: Jun 2009
Posts: 575
Likes: 0
Default

Did you replace Tie rods? Could also be a bad rack. Or something as simple as Needing and Alignment.
 
  #3  
Old 03-14-2010 | 09:55 PM
spoolandsmoke03's Avatar
spoolandsmoke03
Registered User
Joined: Mar 2010
Posts: 10
Likes: 0
Default

What size tires and have you installed a steering box brace ?
 
  #4  
Old 03-14-2010 | 10:47 PM
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 21
From: South GA
Default

Check the steering shaft as it goes into the rack and make sure it is tight. I had that come loose a bit once and has some play in my steering wheel.
 
  #5  
Old 03-15-2010 | 06:39 PM
Slowhand12's Avatar
Slowhand12
Thread Starter
|
Registered User
Joined: Feb 2010
Posts: 22
Likes: 0
From: Pennsylvania
Default

Well I did have the Tie rods replaced. My tires are 265/75/16. And I am at the moment getting a alignment done. Because after going for a totally new front end job I was a little disappointed. I'll report back as soon as it comes back from the Doc's. Thanks for everyone's Help.......................Slowhand12
 
  #6  
Old 03-16-2010 | 09:32 AM
05RamMan's Avatar
05RamMan
Captain
Joined: Jun 2009
Posts: 575
Likes: 0
Default

Its not an entire front end job until the alignment has been done.
 
  #7  
Old 03-16-2010 | 12:44 PM
cwboyjohnny24's Avatar
cwboyjohnny24
Record Breaker
Joined: Nov 2009
Posts: 1,886
Likes: 0
From: Orlando, Fl
Default

You run 16 inch rims??
 
  #8  
Old 03-16-2010 | 07:17 PM
Slowhand12's Avatar
Slowhand12
Thread Starter
|
Registered User
Joined: Feb 2010
Posts: 22
Likes: 0
From: Pennsylvania
Default

Yes I do run 16" wheels. And I just got the word AND I need a new steering Box. So that just about covers it A WHOLE new front end. I guess the only think good about is I took out the Extra warranty Ins. But still its not cheap........Slowhand12
 
  #9  
Old 03-16-2010 | 07:22 PM
ramhunter9's Avatar
ramhunter9
Banned
Joined: Jun 2008
Posts: 5,343
Likes: 0
Default

Originally Posted by weedahoe
Check the steering shaft as it goes into the rack and make sure it is tight. I had that come loose a bit once and has some play in my steering wheel.
spot on weed

had the same problem
 
  #10  
Old 03-16-2010 | 07:24 PM
new2this's Avatar
new2this
Professional
Joined: Dec 2009
Posts: 233
Likes: 0
From: Chico, CA
Default

ramhunter is back? when did this happen? sorry, didnt mean to thread jack. just got caught off guard
 


Quick Reply: Sloppy Steering



All times are GMT -4. The time now is 09:52 AM.