If those wheels are an inch wider, but offset to tuck in more, will there be rubbing issues on full lock turns?

And what size tire will work best? Tire Rack recommends a 285/45/22, but a 305/45/22 will match the stock diameter within a couple of tenths of an inch to maintain an accurate speedo reading - but will the 305's tuck under the fenders?

 

305 will rub and i think that 285 will too

 

Stock wheels are +19.5(3/4 inch) for the 20x9 wheel meaning the wheel has a 3.75 inches going outward from the mounting surface. The srts are +25.4mm (1 inch) for the 22x10 meaning they have 4 inches going outward from the mounting surface. As I recall 4 inchs is more than 3.75 so they will stick out further. I know its not much, but seeing that the front stock wheels dont tuck I dont see how the srts will.

 

would they fit with a "6 lift and 37tires????

 

My head is hurting... 22" with mudders? Everyone has their likes I guess.

37s should fit fine with a 6" lift. I have heard nightmares of 37s though with reguards to the front suspensions on the 3rd Gens. You may want to stop over in the off-road section. It is near the Off Topic section.

 

I ment the offset and the backspacing

This truck seems very cool to me

 

http://www.trucktoyzperformance.com/realm/gallery.htm

then go to trucktoyz install and there you can see a black sport ram

 

Looks sweet. i wish i could afford that lift right now lol

 

just ordered a set (22" SRT)from ebay will let you know how they fit
still undecided!!!!! lower it or level it??????????

 

with the SRT wheels i would say lower it but thats my opinion