4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Want to Change my SLT Bumper/Exhuast to Laramie

Thread Tools
 
Search this Thread
 
  #11  
Old 05-27-2009 | 02:23 PM
CarGuyOhio's Avatar
CarGuyOhio
Admin formally known as 94rt10ohio
Joined: Apr 2005
Posts: 9,026
Likes: 7
From: Curtice, OH
Default

Junk yard! There has to be a few already smashed up on which the tail pipes survived. Just make sure the bozos at the yard do not torch the hangers off the pipes. Could even get the muffler or go aftermarket there. Bumper, well that would be harder to find in a yard without damage.

I have a muffler I can sell you
 

Last edited by CarGuyOhio; 05-27-2009 at 02:26 PM.
  #12  
Old 05-27-2009 | 04:48 PM
Mattones's Avatar
Mattones
Thread Starter
|
Professional
Joined: Mar 2009
Posts: 149
Likes: 0
From: Burlington, Ontario, Canada
Default

Check this out i got a quote from one of the few dealers i e-mailed last night

Thanks for your parts inquiry. The Laramie rear bumper with dual exhaust cut-outs has three parts to the package. The bumper itself is $599.00 plus tax, the bracket package is $93.75 plus tax, and the step is $57.60 plus tax. As for the exhaust system itself, the package for the dual exhaust is $1700.00 plus tax. The labour to install both parts will be from $500.00 to $700.00. The service department would need to take a look at the truck to get an exact figure but that is the low and high end. All parts are available on a pre-paid special order , would have to come out of the U.S.A. and may take up to 2 weeks to arrive.
**** that ill install it myself.
 
  #13  
Old 05-27-2009 | 05:09 PM
sarguy01's Avatar
sarguy01
Record Breaker
Joined: Feb 2009
Posts: 1,661
Likes: 1
From: Virginia Beach
Default

1700$!!! I'd wait for a truck with one to be wrecked or something.
 
  #14  
Old 05-27-2009 | 05:21 PM
Mattones's Avatar
Mattones
Thread Starter
|
Professional
Joined: Mar 2009
Posts: 149
Likes: 0
From: Burlington, Ontario, Canada
Default

Originally Posted by sarguy01
1700$!!! I'd wait for a truck with one to be wrecked or something.
Yeah no doubt haha. I could always do what my boss use to do when he was younger. go to the dealership at night and tak what he wants off a truck. Like a pair of tires with nice rims and leave it on blocks.

But with my luck i'll get caught nor am i a person who would do that.
 
  #15  
Old 05-27-2009 | 05:54 PM
Hdcowboy's Avatar
Hdcowboy
Professional
Joined: Sep 2006
Posts: 160
Likes: 0
From: Santa Fe, Texas
Default

Am I reading that right? $1700 for a dual outlet muffler and tail pipes??? (That is whats on the Hemi's w/ duals right?) Then on top of that the rear bumper, brackets, some sort of steps and labor???
 

Last edited by Hdcowboy; 05-27-2009 at 07:10 PM.
  #16  
Old 05-27-2009 | 08:10 PM
Mattones's Avatar
Mattones
Thread Starter
|
Professional
Joined: Mar 2009
Posts: 149
Likes: 0
From: Burlington, Ontario, Canada
Default

Originally Posted by Hdcowboy
Am I reading that right? $1700 for a dual outlet muffler and tail pipes??? (That is whats on the Hemi's w/ duals right?) Then on top of that the rear bumper, brackets, some sort of steps and labor???
yep. Not worth it. I figure ill wait and put the bumper on myself and maybe pay the dealer cash to install the exhuast.
 
  #17  
Old 05-27-2009 | 08:16 PM
Inbred's Avatar
Inbred
Professional
Joined: Mar 2009
Posts: 203
Likes: 0
From: Lancaster, PA
Default

You can put the factory dual pipes on without the cutout bumper. Granted, that's the look you're probably going for though. Saw it in the service manual the other night, the dual output exhaust can be added as a cosmetic accessory regardless of whether you have the cutout bumper. All the hangers are there. It's just a matter of adjusting the pipes differently to fit under the solid bumper.
 
  #18  
Old 05-27-2009 | 08:29 PM
Mattones's Avatar
Mattones
Thread Starter
|
Professional
Joined: Mar 2009
Posts: 149
Likes: 0
From: Burlington, Ontario, Canada
Default

Originally Posted by Inbred
You can put the factory dual pipes on without the cutout bumper. Granted, that's the look you're probably going for though. Saw it in the service manual the other night, the dual output exhaust can be added as a cosmetic accessory regardless of whether you have the cutout bumper. All the hangers are there. It's just a matter of adjusting the pipes differently to fit under the solid bumper.
Oh really.

Yeah I am really digging that cut out bumper.
 
  #19  
Old 05-27-2009 | 09:25 PM
CarGuyOhio's Avatar
CarGuyOhio
Admin formally known as 94rt10ohio
Joined: Apr 2005
Posts: 9,026
Likes: 7
From: Curtice, OH
Default

Huh, $1700 for the muffler and pipes, I have a piece of gold sitting on my garage floor and did not even know it

I will sell my muffler for $500, sounds like a screaming deal

If you do not get used parts from a junk yard just get the bumper and put on yourself. Get a custom exhaust done at a shop for $300ish and pick out a nice set of tips.
 

Last edited by CarGuyOhio; 05-27-2009 at 09:28 PM.
  #20  
Old 05-27-2009 | 10:06 PM
turk1270's Avatar
turk1270
Veteran
Joined: Mar 2009
Posts: 265
Likes: 0
From: new jersey
Default

i would get the bumper then have a muffler shop do the pipe also for the bumper check out berry dodge in texas they have been the lowest on all the factory parts or accessories that i have ordered
 



Quick Reply: Want to Change my SLT Bumper/Exhuast to Laramie



All times are GMT -4. The time now is 10:02 AM.