4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

lift kit idea

Old Jul 26, 2009 | 03:20 PM
  #1  
09RuffRam's Avatar
09RuffRam
Thread Starter
|
Veteran
Joined: Apr 2009
Posts: 283
Likes: 0
From: BC, Canada
Default lift kit idea

so i have a 6 " lift in my truck already but since it still sits a lil lower than my old 06 does i was thinking another 2 inches would be perfect. do you think it is possible to buy 2 sets of leveling kits since there is coils in the rear and than it would be an extra 2" all around? i havent even looked very close at the set up in the rear since thinkin about this so this may just be a ridiculous idea.
 
Reply
Old Jul 26, 2009 | 05:30 PM
  #2  
sking's Avatar
sking
Veteran
Joined: May 2009
Posts: 374
Likes: 0
From: San Antonio, Texas
Default

might be to much lift for the drive shafts.
 
Reply
Old Jul 26, 2009 | 11:24 PM
  #3  
JC1390's Avatar
JC1390
Professional
Joined: Mar 2009
Posts: 122
Likes: 0
From: Randolph, NJ
Default

Depends on the lift you have...if it came with new coils front and rear then it could probably work...if it came with spacers then I personally wouldnt stack the spacers. And you angles are gonna be pretty extreme after that too. Might have some negative effects.
 
Reply
Old Jul 27, 2009 | 12:13 AM
  #4  
TZM's Avatar
TZM
Rookie
Joined: Jun 2009
Posts: 74
Likes: 0
From: Maple Ridge BC Canada
Default

are you talking about stacking or putting front ones in the rear?? it wont work, u dont have struts in the rear. try a body lift?
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:06 PM.