4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Issues with pro comp programmer (hyper tech)

Thread Tools
 
Search this Thread
 
  #1  
Old 07-28-2009 | 08:35 PM
09 Ram TRX 4 Lover's Avatar
09 Ram TRX 4 Lover
Thread Starter
|
Professional
Joined: Mar 2009
Posts: 235
Likes: 0
From: Oklahoma
Exclamation Issues with pro comp programmer (hyper tech)

Well as some of you have read I had new tires and wheels and a programmer installed sat. Ok here we go.

1) If I use the premium fuel mode on take off is great until you hit between 3,000 and 4,000 rpm's the motor sounds like it is starying for fuel or air or even the timing dosen't adjust sounded terrible, then after 4,000 it accelerates normal again.
2) Put it in regular fuel mode and it's fine.
the other mode is stock. Haven't really messed with it much since this weekend damb work lol. and plus when I was driving tring to hear the motor the wind had to be blowing 15 mph so wind noise was also a factor.
Might give a call to pro comp and see if anyone else has had a issue like this.
 
  #2  
Old 07-29-2009 | 03:02 PM
bigred3297's Avatar
bigred3297
Record Breaker
Joined: Jan 2009
Posts: 1,149
Likes: 1
From: Hawaii
Default

i wasnt aware that a programmer had been released, if its not running right it should be removed until the manufacturer can be contacted. It will void your warranty if you destroy something on your truck
 
  #3  
Old 07-29-2009 | 06:43 PM
09 Ram TRX 4 Lover's Avatar
09 Ram TRX 4 Lover
Thread Starter
|
Professional
Joined: Mar 2009
Posts: 235
Likes: 0
From: Oklahoma
Default

Originally Posted by bigred3297
i wasnt aware that a programmer had been released, if its not running right it should be removed until the manufacturer can be contacted. It will void your warranty if you destroy something on your truck
ya i went back to the regular gas setting and no issues. It's only the premium setting. But yes will be contacting pro comp (hyper tech) and ask some questions.
 
  #4  
Old 07-29-2009 | 10:47 PM
RamPhreak's Avatar
RamPhreak
Professional
Joined: Jul 2009
Posts: 205
Likes: 1
From: VC, California
Default

Interested to see how this pans out.......
 



Quick Reply: Issues with pro comp programmer (hyper tech)



All times are GMT -4. The time now is 05:59 AM.