Dyno #s
The R/T right now is being tested by K&N for the upcomming 09 and up Ram Hemi intake and was told today that it made 304hp bone stock at the wheels on their SuperFlow dyno. Alittle less than I was hoping for but aleast we know the baseline in 95 degree weather.
Still *very* impressive to a former 3x 04-08 style F150 guy. 22% drive train loss is not all that bad when you consider my 06 F150 FX4 with the 5.4L 4speed trans w/ 3.73 rear stock at 300hp to the flywheel was 214 rwhp ( 28.5% loss ). This was on a dynojet, 85 degree day but with a huge barrel fan blowing in front. A stage II package ( tuner/intake/catback magnaflow exhaust/efans and ud pulleys ) brought it up to 264 rwhp, same dyno around same temp but it was enough for me to walk any stock 3rd gen Ram around town.
About what i was expecting, wonder what a good tune will bring us?
Im going to dyno mine next week at the FastHemis grand opening ($75 special 3 runs).. so i will be able to compare mine with an intake and exhaust to other rams to see if i gained/lost and hp/tq throughout the power band.. im guessing my 24s will throw off the results a little... maybe i can bolt on someones stocks for the run..
Results from Hypertechs Dyno run is 340 RWHP for a stock 09 Hemi Ram:
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
Results from Hypertechs Dyno run is 340 RWHP for a stock 09 Hemi Ram:
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
http://www.hypertech-inc.com/media/d...%20cheroke.pdf
sae setting ? Yea, I 've never been too sure on that one, 12.8 % loss?? That's up there with the Titan's loss which has always been impressive ...
Nice! an R/T out in temecula. I stay out in walnut, not too too far away. Whatcha doing in a couple weeks...let's say on a thursday? Ever been to irwindale?
Trending Topics
walnut isnt to far from me.. im in Santa Monica
you should come to the mopar g2g (check out dodge trucks lol) in torrance friday night
https://dodgeforum.com/forum/west/21...-23-in-la.html
you should come to the mopar g2g (check out dodge trucks lol) in torrance friday night
https://dodgeforum.com/forum/west/21...-23-in-la.html
Last edited by Doc Fluty; Aug 20, 2009 at 08:06 PM.
Here is a link to aFe,s Cold Air Intake System Stage 2 Dodge RAM 1500 2009 V8-5.7L Hemi http://afepower.com/catalog/51-11632/NPA.pdf
Its has the Dyno chart on it to.
Its has the Dyno chart on it to.
td according to that dyno in the link you posted these rams only put about 263 hp out... thats a little low by any measure.. i dont see 130 hp loss through the drivetrain..
and not even 260 ft lbs of tq.... somethings is wrong with that dyno sheet
and not even 260 ft lbs of tq.... somethings is wrong with that dyno sheet



