4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Mopar 4" Lift With Bilsteins

Old Feb 20, 2010 | 09:11 PM
  #1  
vodapas's Avatar
vodapas
Thread Starter
|
Rookie
Joined: Feb 2010
Posts: 83
Likes: 0
From: Bloomington, IN
Question Mopar 4" Lift With Bilsteins

Once I get out of this sand box and back stateside one of the first big choices I will have to make is to lift my Ram either 4" or 6". Obviously, if I go the 4" route it will be to preserve my warranty by going with the Mopar (aka Superlift) kit. Even if I was to go with a 6" lift I am still leaning towards Superlift because of the option to add the Bilsteins. That being said, I was wondering if you can upgrade the Mopar branded lift with the Bilsteins the same way that you can if you order it through Superlift or do you have to orders the dampers seperately? I'm also curious if any forum members have the Mopar lift with the Bilsteins?

I did a general 4" lift search and I thought I remembered someone with a 4" lift talking about the Bilsteins but I can't remember if he had the Superlift or the Mopar branded lift. Of course now I can't seem to find that thread again.

Thanks everyone. I've said it before, but I say it again. This forum is an awesome source of information.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:30 PM.