Y-Pipe/Intermediate Pipe Torque
Thread Starter
|
Professional
Joined: Sep 2009
Posts: 101
Likes: 0
From: Oshawa Ontario Canada
Y-Pipe/Intermediate Pipe Torque
Anybody know what the torque spec is for the clamp that is on the pipe between the y-pipe and muffler on a 09 1500 crew dual exhaust. The clamp is at the engine end,thanks.
Professional
Joined: Sep 2009
Posts: 175
Likes: 0
From: Marshall, MI
I think it's German.... gooooodNtight.
I think those are 10mm, and 10mm hardware is generally 35-45 ft-lbs, so I would tighten it in that range... or enough to make it not leak and not too tight to deform the tube.
I think those are 10mm, and 10mm hardware is generally 35-45 ft-lbs, so I would tighten it in that range... or enough to make it not leak and not too tight to deform the tube.
