4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Bedliner Installation

Thread Tools
 
Search this Thread
 
Old Jun 30, 2010 | 10:11 AM
  #1  
lirver's Avatar
lirver
Thread Starter
|
Registered User
Joined: Jun 2010
Posts: 1
Likes: 0
Default Bedliner Installation

I just picked up my new Ram 1500 SLT Crewcab on Saturday. I want to install the Mopar under the rail bedliner this weekend. In the installation instructions there is the following:
"NOTE If the front floor tie down plugs were not removed when cleaning the bed, remove at this time."
I have searched this forum and elsewhere tring to find out what plugs they are talking about without luck. There is a drain hole in the front part of the bed. The only plugs I see are in the front wall of the bed about six inches up. Is this what they are talking about.
Any help would be appreciated, pictures would be great. Thanks in advance.
 
Reply
Old Jun 30, 2010 | 01:18 PM
  #2  
mjaybird65's Avatar
mjaybird65
Registered User
Joined: Jan 2010
Posts: 7
Likes: 0
Default

I had one of these. The plugs up on the front side of the bed were still there, and there are no other plugs. You should be fine with the single drain at the front of the bed. Nothing else to do.
 
Reply




All times are GMT -4. The time now is 09:06 AM.