SEMA Build up
#1
SEMA Build up
Hey guys. I have the 2WD Ram that has the 10" lift on 38s. We decided to go bigger so we sent it down to BNC Off Road down in Texas to get a custom 19 to 20 inch lift built. We are building the truck up for SEMA to be a Truckin feature ride there then after the show they are shooting it for a feature with plans of running it on the cover if the pics turn out great. So chalk one up or the Dodges! Gonna be nice to see something other then a chevy get attention.
I need your help though. Im running out of ideas for the truck. Id like to get some suggestions of parts i should try to go after to get sponsored on the truck for SEMA. Ive got quite a few already but i know there has to be something im not thinking of. Think of your wish this what parts you have. Any suggestions would be much appreciated. I will keep you all posted with updates as the truck progresses. Check out my painter Ed Williamson at www.KustomPaintbyEd.com
Current pic of truck.
Rendering of "The Head Hunter"
I need your help though. Im running out of ideas for the truck. Id like to get some suggestions of parts i should try to go after to get sponsored on the truck for SEMA. Ive got quite a few already but i know there has to be something im not thinking of. Think of your wish this what parts you have. Any suggestions would be much appreciated. I will keep you all posted with updates as the truck progresses. Check out my painter Ed Williamson at www.KustomPaintbyEd.com
Current pic of truck.
Rendering of "The Head Hunter"
#3
thats unnecessary randomdef... a big black ram on 38s doesnt seem stupid to me or many other people. besides, its a sema build up, you got to go big out there to get noticed. thats how you end up in magazines and show others whats possible
rawram are you planning on bringing that paint scheme inside? i painted my silver dash pieces to match my hood & gate..
you have a laramie as well so i know you have the leather and i think that green on the inside with the black would look sick.
with the truck up that tall make sure you get some nice pipe tips out back.. rbp 5" black ones out back would be cool.
you could also look into some rbp side steps... and grille
im usually not a fan of the big build ups that gate seen in truckin.. but this one looks pretty good.
rawram are you planning on bringing that paint scheme inside? i painted my silver dash pieces to match my hood & gate..
you have a laramie as well so i know you have the leather and i think that green on the inside with the black would look sick.
with the truck up that tall make sure you get some nice pipe tips out back.. rbp 5" black ones out back would be cool.
you could also look into some rbp side steps... and grille
im usually not a fan of the big build ups that gate seen in truckin.. but this one looks pretty good.
Last edited by Doc Fluty; 08-12-2010 at 07:41 PM.
#4
Random
While debating and discussion is fine, respect your fellow enthusiasts. Being of a diverse background, members are likely to express different opinions, and while opinions may differ from yours, they are just that, opinions; and everyone is entitled to express theirs freely. We will not tolerate rudeness, insulting posts, or personal attacks.
While debating and discussion is fine, respect your fellow enthusiasts. Being of a diverse background, members are likely to express different opinions, and while opinions may differ from yours, they are just that, opinions; and everyone is entitled to express theirs freely. We will not tolerate rudeness, insulting posts, or personal attacks.
#6
thanks for the input guys! what did random say? i guess it was deleted. we picked up RBP today for a sponsor so we will be running their side steps and grill. the exhaust they dont make for our so i cant run their tips cause the AFE sponsor has exhaust, intake and TB spacer. We will be bringing the paint scheme into the inside. will have a fiberglass headliner painted to match the exterior so when you look up you see it and also a custom console in the middle with some subs painted to match. prolly gonna paint some other trim inside too. the skid plate is a great idea. i updated the rendering with new parts that are going on it. keep the ideas coming, its great to hear other opintions.
#7
Trending Topics
#8
maybe grad a Road Armor or Fab Fours bumper...front and rear?
I'd throw on a led bar from http://www.rigidindustries.com/ instead of those big round blobs on the bull bar.
turbo?
I'd throw on a led bar from http://www.rigidindustries.com/ instead of those big round blobs on the bull bar.
turbo?
#10
check out the www.ironbullbumpers.com they are big, mean, and REALLY nice...i want these for my truck....but they are quite expensive!