4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help with Fuel Efficiency on 2010 Ram 1500 Big Horn w/ 5.7

Thread Tools
 
Search this Thread
 
  #1  
Old 12-18-2010, 02:06 AM
Aviator23's Avatar
Aviator23
Aviator23 is offline
Registered User
Thread Starter
Join Date: Dec 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Help with Fuel Efficiency on 2010 Ram 1500 Big Horn w/ 5.7

I am looking for advice on ways to improve the fuel efficiency of my 2010 Ram 1500 Big Horn Quad Cab with a 5.7 Hemi. I started looking at K&N intake filters, retractable bed covers, and tuners such as Diablosport, Hypertech, and Superchips. I just purchaced my truck last week so I'm just starting to learn what is out there. I am a guy who likes to analyze the numbers, so I'd love to hear the results that any of you have seen with the mods on your trucks. I'm also not looking to spend a fortune. I just want the best bang for my buck. I appreciate any help that I may get.
 
  #2  
Old 12-19-2010, 04:53 AM
1969CoronetR/T's Avatar
1969CoronetR/T
1969CoronetR/T is offline
vaffanculo
Dodge Forum Moderator
Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 7,957
Likes: 0
Received 5 Likes on 3 Posts
Default

Welcome to the site. I will move this thread to the fourth generation Ram section,
FF
 
  #3  
Old 12-19-2010, 06:26 AM
blakeroberts88's Avatar
blakeroberts88
blakeroberts88 is offline
Veteran
Join Date: Jan 2009
Location: Gibsonton, FL
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Aviator23
I am looking for advice on ways to improve the fuel efficiency of my 2010 Ram 1500 Big Horn Quad Cab with a 5.7 Hemi. I started looking at K&N intake filters, retractable bed covers, and tuners such as Diablosport, Hypertech, and Superchips. I just purchaced my truck last week so I'm just starting to learn what is out there. I am a guy who likes to analyze the numbers, so I'd love to hear the results that any of you have seen with the mods on your trucks. I'm also not looking to spend a fortune. I just want the best bang for my buck. I appreciate any help that I may get.
In my opinion and experience, the amount of money you would spend on a cold air intake, programmer, and exhaust to gain an extra 1-1.5 mpg would not be very beneficial on saving money at the pump. They are great for performance, but not very cost effective when it comes to saving gas. You might as well keep the money you were planning to spend on these "gas savers" and just spend it on more gas.
 
  #4  
Old 12-19-2010, 07:30 AM
Rich 2500's Avatar
Rich 2500
Rich 2500 is offline
Veteran
Join Date: Oct 2010
Location: Eastern shore MD
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
Default

I have to agree, it's easy to make more power with these engines, but better economy just isn't there, 6000 pound truck shaped like a brick.
 
  #5  
Old 12-19-2010, 11:33 AM
CarGuyOhio's Avatar
CarGuyOhio
CarGuyOhio is offline
Admin formally known as 94rt10ohio
Join Date: Apr 2005
Location: Curtice, OH
Posts: 9,026
Likes: 0
Received 6 Likes on 4 Posts
Default

How many miles do you drive per year?
 
  #6  
Old 12-19-2010, 02:30 PM
jayman84's Avatar
jayman84
jayman84 is offline
Captain
Join Date: Aug 2009
Location: middle of the state, IA
Posts: 570
Likes: 0
Received 2 Likes on 1 Post
Default

+1...I have aftermarket intake and exhaust plus a programmer and I only gained 1.5 to 2 mpg hand calculated. Good for the performance side but didn't see much of a gain at the pump. Also I will flat out say what most here think....if you are worried about getting extra mpg's out of this thing then trade it for a car.
 
  #7  
Old 12-19-2010, 06:01 PM
mdram43's Avatar
mdram43
mdram43 is offline
Record Breaker
Join Date: Feb 2007
Location: Rockville, MD (right outside DC)
Posts: 1,552
Likes: 0
Received 0 Likes on 0 Posts
Default

i dont mean to come off as a dick, but... its a truck, not a prius. I wasted all the money on intake, exhaust, tuner on my old truck, it only made everything worse. I removed the tuner before selling the truck, and my mpgs went from 8/9 city to 10.5. as the other guy said, the money you waste on all the mods will outweigh the gas savings. welcome to the world of trucks, we know our gas station tendants well!
 
  #8  
Old 12-19-2010, 07:38 PM
'05Train's Avatar
'05Train
'05Train is offline
Registered User
Join Date: Aug 2010
Location: Maryland
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

The Bakflip helps a little bit. It wouldn't hurt going to a lighter wheel and tire combination. But the biggest difference you can make is driving style.
 
  #9  
Old 12-19-2010, 08:19 PM
Gary C.'s Avatar
Gary C.
Gary C. is offline
Veteran
Join Date: Nov 2010
Location: Upstate NY
Posts: 295
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by '05Train
The Bakflip helps a little bit. It wouldn't hurt going to a lighter wheel and tire combination. But the biggest difference you can make is driving style.
X10!
 
  #10  
Old 12-19-2010, 09:05 PM
Aviator23's Avatar
Aviator23
Aviator23 is offline
Registered User
Thread Starter
Join Date: Dec 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

I plan on keeping my truck for a long time. I figured that for every 0.5 mpg improvement, I will save $550 after 100,000 miles if gas prices stay the same (around $2.90). So if I spend $350 for an intake, $350 for tuner, and $1000 for a bed cover, that's a total of $1700. So a gain of 1.5 mpg would pay for these mods by 100,000 miles, but I plan on going past that. I have read some forums where people are seeing 2 mpg gains just by installing any single one of these mods. These numbers make sense to me. I can save money plus I get to enjoy better performance.I also have the convenience of a bed cover. I'm just trying to decide which brands are better. Thanks for your advice.
 


Quick Reply: Help with Fuel Efficiency on 2010 Ram 1500 Big Horn w/ 5.7



All times are GMT -4. The time now is 08:46 AM.