22 inch SRT-10 Wheels
Thread Starter
|
Rookie
Joined: Sep 2009
Posts: 68
Likes: 0
From: Powder Springs, GA
22 inch SRT-10 Wheels
I am trying to find info on 22 inch SRT-10 Wheels and fitment on the 2011 Ram 1500 CC.
Found these replicas on ebay, but before I pull the trigger I would like to turn to my fellow RAM owners and see if anyone has those wheels or has better idea if and how well they would fit the 2011 RAM 1500.
Here are a few specific questions that I cant seem to find a good answer for:
- What would be the best tire size to go with that wheel for 3.92 gears?
- Would there be any rubbing with 305/45/22 tire on a stock truck (no lift no lower)?
- Will my speedometer be affected ?
- What would be the minimum tire size for that wheel?
- Can I install the same wheels front and back or I need to look for different offsets and widht for the fronts?
- Does anyone have this exact setup? Pictures will be greatly appreciated
Thank you!
Found these replicas on ebay, but before I pull the trigger I would like to turn to my fellow RAM owners and see if anyone has those wheels or has better idea if and how well they would fit the 2011 RAM 1500.
Here are a few specific questions that I cant seem to find a good answer for:
- What would be the best tire size to go with that wheel for 3.92 gears?
- Would there be any rubbing with 305/45/22 tire on a stock truck (no lift no lower)?
- Will my speedometer be affected ?
- What would be the minimum tire size for that wheel?
- Can I install the same wheels front and back or I need to look for different offsets and widht for the fronts?
- Does anyone have this exact setup? Pictures will be greatly appreciated
Thank you!
Registered User
Joined: Jun 2012
Posts: 11
Likes: 0
From: Houston, TX
a million people have this set-up.... everyone does 305/45/22s.....on some dodges it has a slight rub on full turn on the inside frame....i dont think youll find different offsets on these wheels for a staggard fitment..i lower profile size would be 305/40/22 but it will look small on there... but i believe the srt10 dodge's come factory with 285/45/22
Rookie
Joined: Feb 2011
Posts: 62
Likes: 0
From: S.C. Pennsylvania
a million people have this set-up.... everyone does 305/45/22s.....on some dodges it has a slight rub on full turn on the inside frame....i dont think youll find different offsets on these wheels for a staggard fitment..i lower profile size would be 305/40/22 but it will look small on there... but i believe the srt10 dodge's come factory with 285/45/22
Thanks for the reply jacoblong44 - since posting here, my research shows that the factory set-up was (305/40/22XL):
And if there is a "million" of them out there - I've never seen one in my area...wish I could find one. Thanks again for the reply.
