4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

engine missfire?

Thread Tools
 
Search this Thread
 
Old Jul 22, 2013 | 10:25 PM
  #1  
yellowd2's Avatar
yellowd2
Thread Starter
|
Registered User
Joined: May 2013
Posts: 1
Likes: 0
Default engine missfire?

2012 Ram 1500, 5.7 Hemi. When I turn onto highway from dead stop and head up a long hill (about 1/2 mile), the engine feels like it is misfiring. This only occurs when pulling hard under 2000 RPM. Dealer says is MDS and is normal, but can't explain why MDS engages from standstill. Anyone have same problem or any ideas as to what is going on.
 
Reply
Old Jul 22, 2013 | 10:43 PM
  #2  
sottis's Avatar
sottis
Rookie
Joined: Apr 2010
Posts: 67
Likes: 2
From: MS
Default

I call BS. MDS isn't going to activate from a dead stop or when you're pulling hard. find a new dealer with a brain.
 
Reply
Old Jul 22, 2013 | 10:57 PM
  #3  
Owensue's Avatar
Owensue
Veteran
Joined: Mar 2011
Posts: 474
Likes: 1
From: Erin, Ontario
Default

Not MDS but possibly traction control, I've had it happen to me once. Dry road, inclined ramp, turning slightly to the right, tromped on the gas and it felt like it died. I could have been rear ended on the ramp.

I hate drive by wire and too much computer control. I know what I want to do and how to drive my damn truck!!
 
Reply
Old Jul 23, 2013 | 10:22 AM
  #4  
LU229's Avatar
LU229
Banned
Joined: Jun 2011
Posts: 1,770
Likes: 1
Default

Drive by wire does suck... you have to wait for all the ducks to get in a row before **** happens.
 
Reply
Old Jul 23, 2013 | 10:59 AM
  #5  
saberworks's Avatar
saberworks
Rookie
Joined: Feb 2012
Posts: 77
Likes: 0
From: Pacific NW
Default

On my 2012, when traction control kicks in there's a light on the dash that's yellow or blinks. If you're not seeing that, it's likely not traction control.

How hard can you be pulling if you're under 2000 rpm?

My "ECO" light doesn't come on ever during acceleration.
 
Reply




All times are GMT -4. The time now is 12:07 PM.