4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

another quick audio question

Thread Tools
 
Search this Thread
 
Old Dec 8, 2014 | 05:24 AM
  #1  
bmsma's Avatar
bmsma
Thread Starter
|
Registered User
Joined: Sep 2014
Posts: 24
Likes: 0
Default another quick audio question

2012 Ram 1500, 4x4 crew cab outdoorsman

currently have upgraded the dash speakers to infinity 3032cf's all 3
have deleted the fac sub and added 2 RF p2 10's in a ported foxbox with a RF t600.2 amp via a audio control lc-2i.

looking at adding a pair of focal 165as components up front. Keeping the fac 430 HU, and adding a Audio Control dq-61 processor/eq to integrate the fac HU and a RF p500.4 amp

orginally was looking at summing the 3.5 dash corners and the front door channels, but it looks like after do some reading the only full range is the rear doors.

the DQ-61 will allow me to sum 4 channels "was going the use the 5th and 6th channel on the sub and remove the lc-2i

has anyone been able to find out what the true frequency range is on the rear door speakers??

even with channel summing im now leaning towards leaving the dash on fac amp power and summing the 4 door channels and adding a set of focal 6x9 in the rear.

just trying to determine if summing the front door and dash would get close to a full range signal,

thanks all
 
Reply




All times are GMT -4. The time now is 09:57 PM.